|
Damon Booster Pump The automatic pressure systems are designed to automatically start and stop the pump on opening and closing of taps. Pressure booster Pump is coupled with a Compact designed composed pump, a manometer, a Pressure diaphragm tank, a pressure adjustable switch, dry running protector and a 3 or 5 ways connection in stamped brass. These pumps should be installed in a covered area, protected against the weather.
DAMON booster Pump is an equipment to achieve the right water resource/pressure Self priming jet pump has a very high hydraulic performance and a considerable pressure capacity. They are very silent and reliable.
APPLICATION
DAMON boosters are particularly suitable to increase pressure of water supply from wells, Storage tanks lifting and distribution in domestic fittings by small and medium sized Pressure tanks.
PERFORMANCE RANGE
Flow rate up to 225 I/min.(13.5 m3/h)
Head up to 60 m
OPERATING LIMITS
- Suction lift up to 9 m
- Fluid temperature up to 60°C
- Maximum ambient temperature 40°C
STRUCTURAL CHARACTERISTICS
- Pump body: Cast Iron
- Pump body cover: Cast Iron
- Motor Support: Aluminum
- Impeller: Brass
- Diffuser: Noryl
- Pump flange: Stainless steel
- Shaft with rotor: Stainless steel
- Mechanical seal Carbon/Ceramic
MOTOR
- Built-in overload motor protector with automatic reset
- Permanent split capacitor
- Protection IP 44
- Shaft with rotor Stainless Steel
Technical Specifications | Model | Power | Max. Flow | Max. Head | |
| Kw | Hp | (m/h) | (m) | | JSP 60 | 0.37 | 0.5 | 2.5 | 32 | | JSP 80 | 0.55 | 0.75 | 3.0 | 41 | | JSP 100 | 0.75 | 1.0 | 3.5 | 46 | | JSP 150 | 1.1 | 1.5 | 4.0 | 50 | | JSP 200 | 1.5 | 2.0 | 5.0 | 55 |
|
